Car Detailing Collection Version 2 PRO - Mosmatic Gun, T304 Couplers, QRC Nozzle Assembly & Generic SS Lance -OG.0003

£235.00
VAT excluded 2-3 Days
  • Car Detailing Garage Collection – PRO 2 OBSESSED GARAGE Package
  • Mosmatic HP Gun & lance complete 
  • Mosmatic 29.131 HP Gun + T304 Coupler
  • Stainless steel generic lance 500mm + T304 Coupler
  • Mosmatic Nozzle Assembly
  • Choice of HP Screw in Nozzle
Nozzle Size
Nozzle Spray Angle
Quantity

CAR DETAILING COLLECTION PROFESSIONAL VERSION 2

MOSMATIC HP GUN 350 BAR, T304 COUPLERS & STAINLESS STEEL GENERIC LANCE 500MM - OG.0003

It’s finally here. The one everyone has been asking me to add to the range. The Professional Obsessed Collection Version with Mosmatic T304 Couplers.

First of all, can I just point out that the original version is more than adequate for most people’s usage and I expect it to be the most popular detailing package for many years to come !

BUT THE BEST JUST GOT BETTER. The PRO version is basically the same 29.131 gun and stainless lance but with improvements. The gun & lance outlets are fitted with Mosmatic T304 Mini Nozzle holders. These are super smooth in operation and lock into position with a satisfying click. (Oh well we are all obsessed with quality) The gun inlet is also fitted with a Mosmatic T304 heavy duty probe.

But the most obvious change to the PRO range is the Quick Connect Nozzle Holder.  This uses screw in nozzles that are fixed into a stainless nozzle holder and protected by the Mosmatic rubber shroud. The nozzle assembly inlet is fitted with a T304 Mosmatic stainless mini probe, which allows the quick connection into the gun or lance outlet. 

Using screw in nozzles with traditional lances makes changing the nozzle size difficult and time consuming. This is why the push fit nozzle concept came about, but now you can have the best of both. A commercial grade screw in nozzle, protected by the rubber shroud to prevent vehicle bodywork damage from accidental contact and have the ability to change the nozzle assembly easily due to the quick connection.

The PRO PACKAGE INCLUDES THE FOLLOWING.

1 x 29.131 Mosmatic HP Gun 350 bar

2 x 70.010 Mosmatic T304 Nozzle Holders for gun and lance outlet

1 x 70.023 Mosmatic T304 3/8” probe for gun inlet

1 x Generic Stainless lance 500mm with T304 Stainless probe inlet

1 x Mosmatic Nozzle Assembly with choice of nozzle spray angle and orifice size.

PLEASE NOTE – THE COUPLER TO CONNECT ONTO THE 3/8" GUN INLET PROBE AND HP HOSE IS NOT INCLUDED.  This can be added from the accessory section of the page and depending on your machine setup.

Kranzle machines will require a 70.012 T304 3/8F Coupler & 51.280 M22M x 3/8M connector




Don't forget to select the correct nozzle size and spray angle for your pressure washer.Nozzle Chart

How to choose the suitable nozzle?  Use the nozzle chart to calculate the correct size.

The pressure and flow of your pressure washer must be known

e.g. 10 l/min (600 l/h) - working pressure of 130 bar.

1. In the first line (pressure in bar) please go to column "130".

2. Follow column "130" down to find l/min: for "10.0" (nearest to 10.7).

3. Turn left in line "10.7" until the first column and stop at nozzle type "040".

4. The size you need is "040"

Push fit nozzles can also be used if required..

OG.0003

Data sheet

Part Number
OG.0003
Inlet Thread
Midi QR Probe Adaptor 3/8 M ø15mm probe
Outlet Thread
Mini QR Coupler 1/4 M x 11.7mm bore
Bar Pressure
350
Temperature (°C)
150
Length
500
Material
Stainless steel
Commodity Code
84242000
Origin
GB

You might also like

Mosmatic Hurricane Flip -...

Mosmatic Hurricane Flip - 78.602

Part Number - 78.602

Inlet Thread - G3/8 F

Bar Pressure - 275

Temperature (°C) - 120

Rotor Arm Size - 2x 1/8" NPTF

HP-Nozzles - 2x 18.1503

Diameter - 300

min. Clearance (mm) - 105

Caster/Wheels - 3x ø60

Commodity Code - 84249090

Origin - CH

Price £628.06
There are not enough products in stock