Car Detailing Collection Version 1 PRO - Mosmatic Gun, T304 Couplers & Mosmatic SS Lance 500mm - OG.0004

£220.00
VAT excluded 2-3 Days
  • Car Detailing Version 1 PRO – OBSESSED GARAGE Package
  • Mosmatic HP Gun & Mosmatic Lance Complete
  • T304 Mosmatic High Quality Couplings & Probes ( Used on PRO Package )
  • Mosmatic 29.131 HP Gun 350 bar + T304 Coupler & T304 Inlet Probe
  • Mosmatic Stainless Steel Lance 500mm + T304 Coupler & Mini Probe Inlet
Quantity

CAR DETAILING COLLECTION PROFESSIONAL VERSION 1

MOSMATIC HP GUN 350 BAR, T304 COUPLERS & MOSMATIC STAINLESS STEEL LANCE 500mm - OG.0004


This package provides all the features of the original version 1 package but upgraded with the additional benefits of using T304 Couplers and the addition of a genuine Mosmatic Lance.
Unlike the PRO version 2 package, this Version 1 PRO package continues to use coloured push fit nozzles in the lance and gun outlets.

Upgrading to T304 couplers does increase the cost of the package substantially but this wasn't designed to fit a budget price. The aim here is on quality, reliability and the desire to own and use the best equipment possible.

FEATURES

Mosmatic Superior Quality HP Gun Rated to 350 Bar ( 5000psi ) Max 45 l/m flow and 150c part number 29.131
The gun outlet has a 1/4F thread which will be fitted with a Mosmatic T304 stainless steel quick release female coupling / nozzle holder, to allow disconnecting a lance easily or using a push fit nozzle directly into the gun outlet. Ideal for detailing work when valeting cars as demonstrated with a similar product on the YouTube channel .

The gun inlet incorporates a Mosmatic swivel joint that remains free turning when under pressure to prevent hose coiling.
This will be fitted with a Mosmatic T304 stainless steel probe. A quick release female coupling ( 3/8F x 15mm bore ) can be used to connect the gun inlet and hose connection. ( SEE ACCESSORY LIST BELOW )  

A Mosmatic Stainless Steel Lance 500mm ( 20″ ) in length with a smooth 300mm black insulation section and bent lance end.
The outlet is fitted with a Mosmatic rubber nozzle shroud and a T304 Mosmatic quick release stainless steel nozzle holder. The lance inlet has a stainless steel male probe fitted to allow a fast connect / disconnect with the gun.


All couplings are Stainless Steel Grade T304 as standard.

The PRO VERSION 1 PACKAGE INCLUDES THE FOLLOWING.

1 x 29.131 Mosmatic HP Gun 350 bar with Swivel Inlet

2 x 70.011 Mosmatic T304 Nozzle Holders for gun and lance outlet

1 x 70.023 Mosmatic T304 3/8” probe for gun inlet

1 x Mosmatic Stainless lance 500mm with T304 Stainless probe inlet and Mosmatic nozzle protector


PLEASE NOTE – THE COUPLER TO CONNECT ONTO THE 3/8" GUN INLET PROBE AND HP HOSE IS NOT INCLUDED.  This can be added from the accessory section of the page and the choice will depend on your machine setup.

Kranzle machines will require a 70.012 T304 3/8F Coupler & 51.280 M22M x 3/8M connector


 

The package is assembled to order therefore please allow a few days delivery.

Please feel free to ask any questions.

* NOZZLE NOT INCLUDED *

Individual push fit nozzles are available at £7 each.  Spray angles 0, 15, 25, 40,degree Push Fit Nozzles ( See Nozzles - Under High Pressure Category )

Don't forget to select the correct nozzle size and spray angle for your pressure washer.NOZZLE CHART

How to choose the suitable nozzle?  Use the nozzle chart to calculate the correct size.

The pressure and flow of your pressure washer must be known

e.g. 10 l/min (600 l/h) - working pressure of 130 bar.

1. In the first line (pressure in bar) please go to column "130".

2. Follow column "130" down to find l/min: for "10.0" (nearest to 10.7).

3. Turn left in line "10.7" until the first column and stop at nozzle type "040".

4. The size you need is "040"

If you need help calculating the nozzle, just email your operating pressure and water flow rate or make and model of machine. I will then reply with the correct size to select.
 

To convert a 22mm female HP hose ( such as Kranzle Hoses ) to use quick release fittings, you need a 3/8m x M22M adaptor. Available in brass or stainless steel from the accessory list below.

OG.0004

Data sheet

Part Number
OG.0004
Inlet Thread
Midi QR Probe Adaptor 3/8 M ø15mm probe
Outlet Thread
Mini QR Coupler 1/4 M x 11.7mm bore
Bar Pressure
350
Temperature (°C)
150
Length
500
Material
Stainless steel
Commodity Code
84249090
Origin
CH

You might also like

Mosmatic Hurricane Flip -...

Mosmatic Hurricane Flip - 78.602

Part Number - 78.602

Inlet Thread - G3/8 F

Bar Pressure - 275

Temperature (°C) - 120

Rotor Arm Size - 2x 1/8" NPTF

HP-Nozzles - 2x 18.1503

Diameter - 300

min. Clearance (mm) - 105

Caster/Wheels - 3x ø60

Commodity Code - 84249090

Origin - CH

Price £628.06
There are not enough products in stock