Car Detailing Collection Version 1 - Mosmatic HP Gun 350 Bar & Stainless Steel Generic Lance 500mm - OG.0001

This is a budget package combination of a Mosmatic gun but fitted with generic couplers and lance.

Mosmatic Superior Quality HP Gun Rated to 350 Bar ( 5000psi ) Max 45 l/m flow and 150c part number 29.131

The gun inlet incorporates a Mosmatic swivel joint to prevent hose coiling when in use.

Stainless Steel lance 500mm ( 20″ ) in length with a 300mm black insulation section and bent lance end.

All couplings are Stainless Steel Grade 304 as standard.

The gun inlet incorporates a Mosmatic swivel joint that remains free turning when under pressure to prevent hose coiling when in use. This will be fitted with a stainless steel midi probe and quick release female coupling ( 3/8F x 15mm bore ) that can be used to connect the gun inlet and hose connection.  

The gun outlet has a 1/4F thread which will be fitted with a stainless steel quick release female coupling / nozzle holder, to allow disconnecting a lance easily or using a push fit nozzle directly into the gun outlet. Ideal for detailing work when valeting cars as demonstrated with a similar product on the YouTube channel .

The stainless steel lance is 500mm ( 20″ ) in length with a 300mm black insulation section and bent lance end.

The outlet is fitted with a rubber nozzle shroud for protection and quick release nozzle holder in stainless steel. The lance inlet has a stainless steel male probe fitted to allow a fast connect / disconnect with the gun.

All quick release couplings and nozzle holders are 304 grade stainless steel . The gun inlet quick release coupling is 15mm bore / 3/8″ Inlet and compact in size to keep the gun connection as small as possible.

The lance barrel is also SS not zinc plated and the gun is a genuine Mosmatic product code 29.131.

The package is assembled to order therefore please allow a few days delivery.

Please feel free to ask any questions.

* NOZZLE NOT INCLUDED *

Individual push fit nozzles are available.  Spray angles 0, 15, 25, 40,degree Push Fit Nozzles ( See Nozzles - Under High Pressure Category )

If you do not know the correct nozzle size for your mahcine, please email with your operating pressure and water flow rate or make and model of machine.

To convert a 22mm female HP hose ( such as Kranzle Hoses ) to use the quick release coupling supplied in this package, you need a 3/8m x M22M adaptor. Available in brass or stainless steel.  If you want a one piece solution for the hose - gun connection, select the 70.905 Mosmatic Coupler